Quantcast
Channel: Exchange Server 2010 forum
Viewing all 16472 articles
Browse latest View live
↧

SPAM rules on Inbox after migration from Exchange 2003 - GFI Mail Essentials

March 19, 2014, 3:28 am
$
0
0

Hello,

Few times ago, we had an Exchange 2003 server with mailboxes which were configured with "rulemgmt.exe" tool (from Microsoft ?) to manage users mailboxes and SPAM redirection in these mailboxes.

GFI MailEssentials (antispam) was installed on a mail relay and once a SPAM was detected, it was redirected in Inbox/SPAM folder on user mailbox thanks to the rule defined by "rulemgmt.exe".

Recently, we did a migration from Exchange 2003 to 2010. Unfortunately, "rulemgmt.exe" doesn't work anymore on Exchange 2010 and it's replaced by a "Transport Rule" which works fine but only to redirect SPAMs in Junk e-mail folder. However, if I don't set up this transport rule, SPAM redirection still works from mailboxes which were created on Exchange 2003 and e-mails go to Inbox/SPAM as before... For new mailboxes on Exchange 2010, it doesn't work which is normal.

My question is: for old mailboxes from Exchange 2003, where are the SPAM redirection (Inbox/SPAM) information stored? I don't understand how SPAM can be redirected if the information is not stored in Exchange...

The aim is to use Junk E-mail folder with the Transport Rule at the end everywhere and to clean old rules used for Inbox/SPAM.

I contact GFI support but they couldn't help me.

Any idea?

Regards,

DeltaSM

           
↧
Search

Automate Connecting to an 2010 Exchange in a different domain from a outlook 2007 client.

March 25, 2014, 8:03 am
$
0
0

Hello, I am hoping someone out in the community has come across this or may have some expertise to point me in the right direction. My company is in the process of breaking away from our Parent companies Domain/Exchange/File shares and we are standing up our own environment completely independent of our Parent Company. My problem is the order we are doing things. We just finished file shares and now we are doing email. Since our desktops are still on our parent companies domain when you launch outlook 2007 it calls back to their exchange and tries to configure from their server. I am trying to figure out a way to point our users to our new exchange instead of our Parent company without touching 750 computers and doing the work manually. I have investigated using a PRF file but this does not work because we are on two totally different AD environments and our username structure is also completely different. I can successfully manually configure the exchange to point to our servers and it works fine but it is a tedious process and I am trying to find a way to automate it somehow. Any help or suggestions would be deeply appreciated.

↧
↧

Exchange 2010 Relay to other Exchange 2010 server on separate site slow in queue and required reboot to flush queue

March 25, 2014, 9:11 am
$
0
0

Hello,

We have 2 exchange 2010 server within our domain.

Email sent from Exchange at Site A (Exchange 2010) to Site B (Exchange 2010) via SMTP relay to remote Active Directory Site and each internal email get stuck in the queue for a period of a few minutes (10-15mins) then they eventually get delivered.

They have a SCL of -1.

Site A can receive fine from Site B ie there is no delay. Its just when Site A to B where the delay occurs.

The problem got worse today where all Emails from site A to B were stuck in the queue all day. I checked if the Exchange Server on Site A could see Site B's FQDN via run command and it could not resolve it.

I had to resort to rebooting the server which then flushed the queue out and the Emails arrived. I then noticed the Information store would not mount and I had to run net time\\ADSERVERNAME /set then resart the AD topolgy service to get the information store mounted again.

All seems to be ok now but there is still a delay of 10 to 15 mins before an email from Site A to Site B arrives. All other external email is sent in normal time, its just Email between the 2 sites that is the problem.

Has anyone seen this before or have anything I can look at or try to fix this?

Thanks for your time

Adam

↧

Some messages not in exchange message logs when rejected by Sender Filter

March 25, 2014, 10:06 am
$
0
0

We have found that certain senders' emails are not displayed in the Exchange Message tracking logs when rejected by the Sender Filter Agent, but others do display in the logs.

We are running Exchange 2010 on Server 2008 R2.

Message tracking logs work fine in general, and many messages which have been rejected by Sender Filter Agent do appear, but messages from certain domains do not appear (gmail and hotmail tested so far). The sender does receive a failed delivery notification, but nothing appears in the logs.

When we remove the domain / email address from the Sender Filter, the emails are received fine and that shows in the logs. When we send a test email and add the domain / email address to the Content Filter (using a test word) it does show in the logs (and shows that it was rejected by Content Filter Agent).

Anyone have any idea why this might be?

TIA.

↧

Cluster Group - Partially online

March 25, 2014, 9:05 am
$
0
0

Our current setup is Primary Site and DR site with a DAG.

Primary site is having 2 Mailbox servers, 2 hubcas servers with an NLB and one CAS server for OWA.

DR Site is having 1 mailbox server, one hubcas server and one CAS server.  (Two FSW servers, primary FSW - Primary site HUBCAS, Alternate FSW is DR site HUBCAS)

FSW was in alternate FSW and we moved it to Primary FSW. And now when run cluster group command it shows the below output (See 1.), what is the reason for cluster group to show as Partially online. This DR-MBX-01 is the PAM. How can we make it online? Move PAM also to Primary site ???

* When run - Get-DatabaseAvailabilityGroup -Status | fl : It shows WitnessShare InUse:PRIMARY

1.
Group                Node            Status
-------------------- --------------- ------
Cluster Group        DR-mbx-01      Partially Online
Available Storage    PR-MBX-02      Offline

DAG is working fine, replication also ok.

Thanks,

Kanishka.

↧
↧

Event ID 104

March 24, 2014, 6:23 pm
$
0
0

A few months ago I opened a ticket with Microsoft support regarding a spam issue. One of the steps they had me perform was create a new mailbox database and migrate my mailbox to the new database. I finally got around to moving my mailbox back to the original database and when I dismount the test database the following message appears in application event log every five minutes. If I mount the database the error stops. I've tried the obvious, there is sufficient disk space. not sure what I'm doing wrong. I have Exchange 2010 SP2 on Windows 2008 R2 SP1.

Any assistance is greatly appreciated.

Robert

Event ID 104

Log Name:      Application
Source:        MSExchange Search Indexer
Date:          3/24/2014 9:04:55 PM
Event ID:      104
Task Category: General
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      xxxx.xxx.xxxx
Description:
Exchange Search Indexer failed to enable the Mailbox Database Test (GUID = c94400e4-2b69-4ff5-b4e9-3abe26fde36d) after 1 tries. The last failure was: MapiExceptionMdbOffline: Unable to get CI watermark (hr=0x80004005, ec=1142)
Diagnostic context:
    Lid: 1494    ---- Remote Context Beg ----
    Lid: 44215  
    Lid: 60049   StoreEc: 0x8004010F
    Lid: 49469  
    Lid: 65341   StoreEc: 0x8004010F
    Lid: 56125  
    Lid: 47933   StoreEc: 0x8004010F
    Lid: 32829  
    Lid: 49213   StoreEc: 0x8004010F
    Lid: 48573  
    Lid: 64957   StoreEc: 0x8004010F
    Lid: 9518    StoreEc: 0x476     
    Lid: 1750    ---- Remote Context End ----
    Lid: 8434    StoreEc: 0x476     
    Lid: 13362   StoreEc: 0x476     . It will retry after 10 minutes.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="MSExchange Search Indexer" />
    <EventID Qualifiers="49156">104</EventID>
    <Level>2</Level>
    <Task>1</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-03-25T01:04:55.000000000Z" />
    <EventRecordID>24743425</EventRecordID>
    <Channel>Application</Channel>
    <Computer>xxxx.xxx.xxxxx</Computer>
    <Security />
  </System>
  <EventData>
    <Data>Test</Data>
    <Data>c94400e4-2b69-4ff5-b4e9-3abe26fde36d</Data>
    <Data>1</Data>
    <Data>MapiExceptionMdbOffline: Unable to get CI watermark (hr=0x80004005, ec=1142)
Diagnostic context:
    Lid: 1494    ---- Remote Context Beg ----
    Lid: 44215  
    Lid: 60049   StoreEc: 0x8004010F
    Lid: 49469  
    Lid: 65341   StoreEc: 0x8004010F
    Lid: 56125  
    Lid: 47933   StoreEc: 0x8004010F
    Lid: 32829  
    Lid: 49213   StoreEc: 0x8004010F
    Lid: 48573  
    Lid: 64957   StoreEc: 0x8004010F
    Lid: 9518    StoreEc: 0x476     
    Lid: 1750    ---- Remote Context End ----
    Lid: 8434    StoreEc: 0x476     
    Lid: 13362   StoreEc: 0x476     </Data>
    <Data>10</Data>
  </EventData>
</Event>
↧

Resource tabs missing in exchange management console 2010 for room mailbox.

March 25, 2014, 10:47 am
$
0
0

I am logged in as domain admin, and want to change resources for a room mailbox to allow conflicts, but there are no resource tabs in the permissions with the exception of "Resource Information". I verified that the permissions are correct, and that I have full access to the room. I have tried this in power shell:

I also have this issue, but when I try to go to the resource tabs in the exchange management console, they are all missing. I tried this:

"http://social.technet.microsoft.com/Forums/exchange/en-US/5909104b-f818-47ac-970f-239c72d62ff8/room-mailbox-properties-missing-tabs?forum=exchangesvradminlegacy"

set-mailbox room mailbox -applymandatoryproperties

but I get this:

WARNING: The command completed successfully but no settings of mailbox have been modified.

I can't find anything else online that even talks about the tabs not being available other than permissions, but I have already verified that the domain admin has permissions, please assist.

Thanks,

Marc.

↧

Using ADFS with Outlook Anywhere, Activesync

December 12, 2012, 1:33 pm
$
0
0

Hello,

I know that this isn't supported by default however I'm scouring the interweb looking for information as to how to use ADFS to authenticate Outlook Anywhere, Activesync, and Lync 2010. Even if this means hiring an integration firm, I'd like to know what to ask them to do or what the best approach to be. If there's a 3rd party solution I'd also be open to that! Thanks for any info!

↧
Search

Installing a single Go Daddy Certificate on two exchange 2010 servers

March 25, 2014, 12:23 pm
$
0
0
I have two Exchange 2010 servers. I want to set up a DAG group so if one email server goes down the other will pick up in its spot. I purchased a certificate from Go Daddy. The certificate includes 5 names or domains which includes the fully qualified domain name for both my exchange servers Server1 and Server2. I generated the request from Server1 and have completed the request and assigned all the services I wanted to use with this certificate. I have imported the certificate into the local CA console as well on both Server1 and Server2. I tried to import the same Go Daddy certificate on Server2 but it tells me the Thumb print is all ready in uses on the network. I am aware that Server1 is using this certificate. So how do I get a certificate I can import from this same Go Daddy certificate?  
↧
↧

Diskpart.ps1

March 25, 2014, 12:18 pm
$
0
0

I'm having an issue trying to use the "DiskPart.ps1" script generated from the "Exchange 2010 Server Role Requirements Calculator" spread sheet.

I've saved the "DiskPart.ps1" on the server in my lab and created a "Server.csv" file and saved it to "C:\windows\System 32\" the .csv looks like:

"ServerName,"StartDrive","DriveCount","Path"
"Server 1","2","5","C:\ExchangeData\DB1, C:\ExchangeData\DB2, C:\ExchangeData\DB3, C:\ExchangeData\DB4, C:\ExchangeData\DB5"

Obviously when I take the server into production environment the mount point will not be on the C drive.

I've attached the 5 disks and left offline is disk manager, but when I run the script it does nothing as far as I can see?!?

I've also set the "ExecutionPolicy" to "Unrestricted" in case this is the issue, but with the same result.

I would normally just do this work myself in diskpart, but the deployment I'm working on has 5 database server with each server needed 22 LUN's formatting\mounting etc. etc.

Any advice would be appreciated, many thanks in advance.

Michael

↧

can be restore public folder

March 25, 2014, 8:59 am
$
0
0

Please let me know if can be restore public folder on another exchange server.

I have DAG environment with one public folder. BY mistake user has been deleted their one sub folder from PF hierarchy. I tried to recover the data from recover deleted Item but retention period has been already left. Now I have only one option to restore the public folder from the backup.

Now my question is can be restore public folder on another exchange server which is exist on same DAG environment. Or I need to build isolated exchange server to restore the public folder.

↧

Move existing Exchange 2010 server to new hardware and reinstalling Exchange 2010

March 25, 2014, 10:58 am
$
0
0

Hi so as the title states I need to Install Exchange 2010 on a brand new 2008R2 Server and transfer everything from the old Exchange Server.

Couple things though.

  • Existing 2008R2 Server w/ Exchange 2010 is also a Domain Controller.
  • Exchange needs to be uninstalled completely once Exchange is setup and going on new hardware.
  • Existing 2008R2 Server needs to stay up and stay a domain controller.

Questions are how do I go about this step by step?

Am I going to have problems uninstalling Exchange from the Domain Controller?  Will this mess up anything with the Schema?

Any how to guides would be great.  New Server will of course have a different name than existing Domain Controller server.

Any questions let me know.

Thanks!

↧

The response from the Autodiscover service at 'https://otherdomain.com/Autodiscover/Autodiscover.svc/WSSecurity' didn't return a valid value for user setting 'ExternalEwsUrl'.

March 25, 2014, 1:08 pm
$
0
0

Getting the following error in Exchange 2010 in my domain. I am trying to access autodiscover in another domain that is setup to do federated trust with my domain. This error occurs when a client on my domain tries to retrieve calendar info for a user in the other domain.


Log Name:      Application

Source:        MSExchange Availability

Event ID:      4001

Task Category: Availability Service

Level:         Error

Keywords:      Classic

User:          N/A

Computer:      myserver

Description:

Process Microsoft.Exchange.InfoWorker.Common.Delayed`1[System.String]: <>SMTP:user@otherdomain.com failed. Exception returned is Microsoft.Exchange.InfoWorker.Common.Availability.AutoDiscoverFailedException: Autodiscover failed for e-mail address <>SMTP:user@otherdomain.comwith exception Microsoft.Exchange.InfoWorker.Common.Availability.AutoDiscoverFailedException: The response from the Autodiscover service at 'https://otherdomain.com/Autodiscover/Autodiscover.svc/WSSecurity' didn't return a valid value for user setting 'ExternalEwsUrl'.

. Name of the server where exception originated: myserver. ---> Microsoft.Exchange.InfoWorker.Common.Availability.AutoDiscoverFailedException: The response from the Autodiscover service at 'https://otherdomain.com/Autodiscover/Autodiscover.svc/WSSecurity' didn't return a valid value for user setting 'ExternalEwsUrl'.

. Name of the server where exception originated: myserver

   --- End of inner exception stack trace ---

. Name of the server where exception originated: myserver. This event may occur when Availability Service cannot discover an Availability Service in the remote forest.

I have access to the exchange servers on both domains. On the domain I am trying to contact, I run "get-webservicesvirtualdirectory | fl", and confirm that the internal and external URLs are valid. OA is enabled on both domains.

Any advice would be appreciated.



↧
↧

WS-Management services does not support the request - SBS 2011 Exchange 2010 SP2

March 23, 2014, 7:33 am
$
0
0

Hi,

I'm getting the above message and can't seem to resolve the problem.

Here's what I have done so far:

Recreated PowerShell virtual directory

Checked Path, and System environment variable for Exchange path

Run EMTShooter a couple of times to get this error message and verified the message is the same whether remote or on the server itself.

What does look strange, is the web.config within the PowerShell folder is practically empty, it just references kerauth.

Any ideas what I can try next and what user permissions should be on the PowerShell folder?

Thanks

↧

Find all mailboxs with groups that have full mailbox access

March 25, 2014, 1:23 pm
$
0
0

I am trying to find all the mailboxes which have a group assigned Full mailbox access.

Example:

Mailbox: Accounting Mailbox

Assigned Full Access: Accounting Group

Bobby Pendino

↧
Search

missing free busy information sporadically

March 17, 2014, 5:36 am
$
0
0

i have a couple of users that sporadically cannot see the free busy information of other users in outlook when they add some users for meetings. my user is part of exchange admin and domain/enterprise admins and its happening to me as well. happens in both cached and non cached outlook modes.

running exchange 2010 sp3. outlook 2010 and 07.

when the issue does happen if i hover over the white backslashed bar i get the errors:

"no information.
no free/busy information could be retrieved

you do not have permissions to see the recipients free busy."

↧

451 4.4.0 No Delivery Agent Handled the queue - Delivery delayed with eh IMCEAMOBILE address

March 26, 2014, 5:45 am
$
0
0

What does this mean? How do I get rid of it so people aren't getting these return errors? 

It only happens occasionally to certain people. 

Here's the generated return error:

Diagnostic information for administrators:

Generating server: MAIL001.DOMAIN.COM

IMCEAMOBILE-+2B14026163663@DOMAIN.COM
#550 4.4.7 QUEUE.Expired; message expired ##

Original message headers:

Received: from MAIL011.DOMAIN.COM ([fe80::965:4373:6a96:1fbe]) by
 MAIL001.DOMAIN.COM ([::1]) with mapi id 14.03.0169.001; Mon, 24 Mar
 2014 15:15:00 -0500
Content-Type: application/ms-tnef; name="winmail.dat"
Content-Transfer-Encoding: binary
From: "Doe, John" <jdoe@domain.com>
To: +15555555555 <IMCEAMOBILE-+2B14026163663@DOMAIN.COM>
Subject:
Thread-Index: AQHPR527Ii4asWHrEECkvOqPev2urA==
Date: Mon, 24 Mar 2014 15:15:00 -0500
Message-ID: <4DDD98BBAE19CE43A30C751F12A1D1466D0DA0E1@MAIL011.DOMAIN.COM>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-TNEF-Correlator: <4DDD98BBAE19CE43A30C751F12A1D1466D0DA0E1@MAIL011.DOMAIN.COM>
MIME-Version: 1.0


↧
↧

SMTPAuthenticationException:504 5.7.4 Unrecognized authentication type

March 26, 2014, 7:18 am
$
0
0

Hi Folks,

we have a 3rd party system that wants to send automated emails externally, I have setup a new receive connector on our cashub servers just to allow this server to be able to use our exchange as a relay, I've checked all the forums about how to do it and followed all the recommended instructions.

we've been testing the 3rd party system to see in the emails get sent correctly and they are not, when I check the logs I get the below , can anyone suggest anything I haven't already tried?

thanks in advance.

Owen.

error message 1:

Exception information:
--------------------------------------------------1
Quiksoft.EasyMail.SMTP.SMTPAuthenticationException:504 5.7.4 Unrecognized authentication type

   at Quiksoft.EasyMail.SMTP.SMTP.?(String A_0, EmailMessage A_1, ? A_2, SMTPQueueType A_3, Boolean A_4)
   at Quiksoft.EasyMail.SMTP.SMTP.Send(EmailMessage MessageObj)
   at Odyssey.Workflow.WorkflowEmailActionNode.SendEmail(String to, String cc, String from, String bcc, String subject, String body, MailFormat bodyFormat, String[] attachments, Boolean deleteAttachmentsAfterSend, String smtpServerName, Boolean isAuth, Int32 smtpPort, String smtpLogin, String smtpPassword)
   at Odyssey.Workflow.WorkflowEmailActionNode.SendEmail(String to, String cc, String from, String bcc, String subject, String body, MailFormat bodyFormat, String attachment, Boolean deleteAttachmentsAfterSend, String smtpServer, Boolean isAuth, Int32 smtpPort, String smtpLogin, String smtpPassword)
   at Odyssey.Workflow.Generated.LOCKEDResourceNotificationEmailCallAssigned_v43.EmailExternal_Logic()

error message 2:

Workflow Worker Action failed

--------------------------------------------------

Exception information:

--------------------------------------------------1

System.InvalidOperationException:The worker experienced an error in 'Run'.

   at Odyssey.Workflow.Actions.WorkflowWorkerAction.RunWorker(WorkflowDom dom, WorkflowWorker worker, AuditWriter& writer)

   at Odyssey.Workflow.Actions.WorkflowWorkerAction.Run(IActionExecutionContext context)

--------------------------------------------------2

Quiksoft.EasyMail.SMTP.SMTPAuthenticationException:504 5.7.4 Unrecognized authentication type

   at Quiksoft.EasyMail.SMTP.SMTP.ᜀ(String A_0, EmailMessage A_1, ᜄ A_2, SMTPQueueType A_3, Boolean A_4)

   at Quiksoft.EasyMail.SMTP.SMTP.Send(EmailMessage MessageObj)

   at Odyssey.Workflow.WorkflowEmailActionNode.SendEmail(String to, String cc, String from, String bcc, String subject, String body, MailFormat bodyFormat, String[] attachments, Boolean deleteAttachmentsAfterSend, String smtpServerName, Boolean isAuth, Int32 smtpPort, String smtpLogin, String smtpPassword)

   at Odyssey.Workflow.WorkflowEmailActionNode.SendEmail(String to, String cc, String from, String bcc, String subject, String body, MailFormat bodyFormat, String attachment, Boolean deleteAttachmentsAfterSend, String smtpServer, Boolean isAuth, Int32 smtpPort, String smtpLogin, String smtpPassword)

   at Odyssey.Workflow.Generated.LOCKEDResourceNotificationEmailCallAssigned_v44.EmailExternal_Logic()

   at Odyssey.Workflow.Generated.LOCKEDResourceNotificationEmailCallAssigned_v44.IsExternalResource_Navigate()

   at Odyssey.Workflow.Generated.LOCKEDResourceNotificationEmailCallAssigned_v44.HasAssignmentType_Navigate()

   at Odyssey.Workflow.Generated.LOCKEDResourceNotificationEmailCallAssigned_v44.IsitavalidEmailAddress_Navigate()

   at Odyssey.Workflow.Generated.LOCKEDResourceNotificationEmailCallAssigned_v44.IsBREAKDOWNTask_Navigate()

   at Odyssey.Workflow.Generated.LOCKEDResourceNotificationEmailCallAssigned_v44.Run()

   at Odyssey.Workflow.Actions.WorkflowWorkerAction.RunWorker(WorkflowDom dom, WorkflowWorker worker, AuditWriter& writer)

error message 3:

Entity Audit Error Message

Entity Type: Odyssey.Workflow.WorkflowDom

Entity id: 34

Email External: Unexpected exception

--------------------------------------------------

Exception information:

--------------------------------------------------1

Quiksoft.EasyMail.SMTP.SMTPAuthenticationException:504 5.7.4 Unrecognized authentication type

   at Quiksoft.EasyMail.SMTP.SMTP.ᜀ(String A_0, EmailMessage A_1, ᜄ A_2, SMTPQueueType A_3, Boolean A_4)

   at Quiksoft.EasyMail.SMTP.SMTP.Send(EmailMessage MessageObj)

   at Odyssey.Workflow.WorkflowEmailActionNode.SendEmail(String to, String cc, String from, String bcc, String subject, String body, MailFormat bodyFormat, String[] attachments, Boolean deleteAttachmentsAfterSend, String smtpServerName, Boolean isAuth, Int32 smtpPort, String smtpLogin, String smtpPassword)

   at Odyssey.Workflow.WorkflowEmailActionNode.SendEmail(String to, String cc, String from, String bcc, String subject, String body, MailFormat bodyFormat, String attachment, Boolean deleteAttachmentsAfterSend, String smtpServer, Boolean isAuth, Int32 smtpPort, String smtpLogin, String smtpPassword)

   at Odyssey.Workflow.Generated.LOCKEDResourceNotificationEmailCallAssigned_v44.EmailExternal_Logic()

hope these errors help!



↧

how to delete the messages in the purges folder?

March 26, 2014, 7:05 am
$
0
0

if the mailbox is enabled the single item recovery, then the messages would move from deletion folder to the purges folder After running the following script,

Search-Mailbox dave -searchdumpsteronly-deletecontent

so my question is how to delete the messages in the purges folder with some script or retention policy?


Please click the Mark as Answer button if a post solves your problem!



↧

Problems with EWS and CAS to CAS proxy

March 26, 2014, 8:28 am
$
0
0

I'm setting up a new exchange site with a new cas, mailbox, hub transport server and running into some issues. During the migration we're going to do a CAS to CAS proxy between two AD sites. I've moved a test mailbox and running into some issues with testing. Everything seems to work from a connection setup, I can use activesync, outlook anywhere, OWA. If I run all the tests from exrca.com it works except for testing exchange web services. I've set the externalurl on EWS to null and then the internalURL is just using the server name /EWS/exchange.asmx on the new server. When I run this test I'm getting this error below. Yet If I just try to browse to that site on the new server from the internet facing CAS server it works just fine.

Creating a temporary folder to perform synchronization tests.
 Failed to create temporary folder for performing tests.
 
Additional Details
 
Exception details:
Message: The request failed. The remote server returned an error: (404) Not Found.
Type: Microsoft.Exchange.WebServices.Data.ServiceRequestException
Stack trace:
   at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request)
   at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.ValidateAndEmitRequest(IEwsHttpWebRequest& request)
   at Microsoft.Exchange.WebServices.Data.MultiResponseServiceRequest`1.Execute()
   at Microsoft.Exchange.WebServices.Data.ExchangeService.BindToFolder[TFolder](FolderId folderId, PropertySet propertySet)
   at Microsoft.Exchange.Tools.ExRca.Tests.GetOrCreateSyncFolderTest.PerformTestReally()
Exception details:
Message: The remote server returned an error: (404) Not Found.
Type: System.Net.WebException
Stack trace:
   at System.Net.HttpWebRequest.GetResponse()
   at Microsoft.Exchange.WebServices.Data.EwsHttpWebRequest.Microsoft.Exchange.WebServices.Data.IEwsHttpWebRequest.GetResponse()
   at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request)
Elapsed Time: 4804 ms.

↧
Viewing all 16472 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>